CC2531EMK and CC1111EMK for sniffing

dhinesh kumar

Other Parts Discussed in Thread: CC2531EMK

Hi We are planning to use CC2531EMK and CC1111EMK for sniffing 2.4Ghz and 868Mhz for mass deployment(approx 180quantiy).
Requirement: can we create multiple threads; to access multiple sniffing dongles at the same time.
My management team would like to have a call or to set up a meeting with your tech team to discuss this.

over 4 years ago

0 YiKai Chen over 4 years ago

Guru 735695 points

See no problem to create multiple threads to access multiple sniffing dongles at the same time.

0 Ryan Brown1 over 4 years ago

TI__Guru**** 219597 points

Hi dhinesh,

Both of these devices are supported in PACKET-SNIFFER, multiple instances of which can be run at the same time.

Regards,
Ryan

0 dhinesh kumar over 4 years ago in reply to YiKai Chen

Prodigy 10 points

HI Chen , thanks for your input, Please find the attached image of the process flow,
our requirement is : If we connected multiple Zigbee dongles in a single USB hub and the USB hub is connected with the PC along with
SmartRF Studio software. through the sniffing tool(SmartRF Studio software) can we create multiple threads; to access multiple sniffing dongles, at the same time.

0 YiKai Chen over 4 years ago in reply to dhinesh kumar

Guru 735695 points

Yes, there is no problem.

0 dhinesh kumar over 4 years ago in reply to YiKai Chen

Prodigy 10 points

Hi Chen , thanks for your swift response, I have one more question also here, can we able to automate the SmartRF Studio software tool.

0 YiKai Chen over 4 years ago in reply to dhinesh kumar

Guru 735695 points

I don't see such flexibility.

0 Ryan Brown1 over 4 years ago in reply to dhinesh kumar

TI__Guru**** 219597 points

Hi dhinesh,

You could see whether the SmartRF Studio PERL Extension meets your needs, or consider migrating to a CC13xx/26xx solution which allows you to access the RTLib.

Regards,
Ryan

Zigbee & Thread

Zigbee & Thread forum

CC2531EMK and CC1111EMK for sniffing