• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 55 subscribers
  • Views 420 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC2652P: sensitivity test with CMW100+SRF studio

Albin Zhang
Expert 6140 points
Part Number: CC2652P


Hi There, 

one of my customer tested the sensitivity with CMW100. but found looks the packets keep changing in the SRF studio. 

do you see the same phenomenon when you tested the sensitivity? 

if someone succeed to test the sensitivity, could you share the waveform file of CMW100? thanks. 

  • 0
    TI__Genius 15590 points

    Hi Albin,

    Are they testing on a LaunchPad or custom board?

    Unfortunately I'm not familiar with the CMW100, so I can't provide a waveform file. It looks like half of the packets are being received as "Not OK" (shown on the right). Are you performing this test in a shielded environment? 

    You can alternatively test sensitivity with an additional LaunchPad as the transmitter (set up with SRF with Packet TX). At the very least, this can be a point of comparison for you

    Thanks,

    Alexis