Part Number: CC1352P
Good day Colleagues,
could you tell me if the CC1352P supports UART IRDA mode?
Thank you, Mikhail
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: CC1352P
Good day Colleagues,
could you tell me if the CC1352P supports UART IRDA mode?
Thank you, Mikhail
Hi Mikhail,
The UART TI Driver was not developed to enable this mode of operation. TIDA-01212 uses the Sensor Controller and a timer module to bit-bang the IrDA PHY. Please consider using a similar approach.
Regards,
Ryan