Launchpad as a coordinator + router

Dani Navarro

Part Number: CC2652R

Hi,

I want to build a zigbee network with 3 CC2652 launchpads, each one of them as a different node of the network. My question is: can I use a launchpad as a coordinator + router and change between those 2 modes?

over 4 years ago

+1 YiKai Chen over 4 years ago

Guru 735705 points

You can run ZNP on CC2652 launchpad so host can configure it as coordinator or router according to your application requirements.

+1 Ryan Brown1 over 4 years ago

TI__Guru**** 224257 points

Hi Dani,

Please refer to the ZNP example, Zigbee Network Processor Interface Section of the Z-Stack User's Guide, and Z-Stack Monitor and Test API for more details.

Regards,
Ryan

Zigbee & Thread

Zigbee & Thread forum

Launchpad as a coordinator + router