This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC2531: ZDO_LEAVE_IND

Part Number: CC2531
Other Parts Discussed in Thread: Z-STACK

Hi everyone !!

I am facing problems in connecting Door Sensor with my Coordinator (using CC2531 usb dongle) 

Sensor send ZDO_LEAVE_IND after ZDO_MGMT_PERMIT_JOIN_REQ.

I found a related post but sadly it doesn't work : https://e2e.ti.com/support/wireless-connectivity/zigbee-thread-group/zigbee-and-thread/f/zigbee-thread-forum/311838/zdo_leave_ind-after-zdo_mgmt_permit_join_req

What do I do next to let the end device don't leave ?