Disable Child Aging in ZStack 3.X.0

Luca Vetri

Hi,

Is it possible in ZStack 3.X.0 to disable Child Aging or it is mandatory?

Also: if a device get child aged out and get kicked out of the association table, once power on again will it rejoin the network or you need to pair it again?

over 3 years ago

+1 YiKai Chen over 3 years ago

Guru 735695 points

You cannot disable child age in Zigbee 3.0.
The device would rejoin if it’s kicked out due to child age out.

0 Luca Vetri over 3 years ago in reply to YiKai Chen

Intellectual 560 points

But it would rejoin the same way it would rejoin if it lost the connection to the network or repairing is needed?

0 YiKai Chen over 3 years ago in reply to Luca Vetri

Guru 735695 points

It should rejoin after losing connection.

0 Luca Vetri over 3 years ago in reply to YiKai Chen

Intellectual 560 points

Thank you so much.

Zigbee & Thread

Zigbee & Thread forum

Disable Child Aging in ZStack 3.X.0