Build OTA Server Using MT Commands.

Try to refer to dev.ti.com/.../node

I have a Sonoff CC2562P Dongle. Can i flash on it the ZC_OTA_SERVER Example and connect to it via OtaServer PC Tool?

Where Can I download the ZC_OTA_SERVER Example and OtaServer PC Tool? Any Link?

You can download and install SIMPLELINK-CC13XX-CC26XX-SDK from https://www.ti.com/tool/SIMPLELINK-CC13XX-CC26XX-SDK to have the example  and OtaServer PC Tool.

If I open the OTA Server Example I only see a tirtos folder, how do i build the firmware?

C:\ti\simplelink.....\examples\rtos\CC1352P_2_LAUNCHXL\zstack\

You have to install CCS12 and import the project to build and download it.

I have imported the project from the path I wrote above but I see no CCS folder. only iar and tclang inside a tirtos folder

Which SimpleLink CC13xx SDK version do you use?

The One You Linked Above. 6.20.

Does OtaServer perform OTA Update on end-device or not?

Try to refer to the following screenshot to import zc_ota_server project under C:\ti\simplelink_cc13xx_cc26xx_sdk_6_20_00_29\examples\rtos\CC1352P_2_LAUNCHXL\zstack\ folder

This is what I see when I import the project from the path you wrote.

If I right click on the project and try to build it nothing happens.

If I try to open the .syscfg file this is what I see

You can click the build icon to build zc_ota_server project

The Icon doesnt work because I don't have any source code in the folder. I just have the files I showed above.

I would suggest you to remove the project from CCS and import again.

Doesn't work. If I open the folder I see no source code in it.

Can you do some screenshots to show me how you import zc_ota_server project?

Here are the screenshots.

File->Open Project From File System.  The Folders are empty.

PS: Would also like to point a very small bug for OTAServer.exe. If you click on the Setup.exe it will look for OtaServer_setup.msi but the file is named ota_server_setup.msi so setup.exe does fail.

You should  go to CCS File > Import > C/C++ > CCS Projects and click next to import project. Don't use File->Open Project From File System.

Nothing. It doesn't give me any possibility to import it.

I have no C Files Inside the folder. is it right?

You have to remove the imported zc_ota_server project in CCS Project Explorer before you import again.

Nothing.

I see you use SDK 5.20 not 6.20. Please download and use SDK 6.20 to test this.

Same error.

Maybe try to uninstall CCS and all SDK to reinstall them to test from scratch.

Nothing has changed.

Hi Ayman,

I've confirmed that the zc_ota_server example projects work as expected with my system.  You may also need to delete your existing workspace.

Regards,
Ryan

Hi Ryan,

Somehow managed to fix it.

Finally…