CC1352P7: Example of battery powered remote device

dAVID

Part Number: CC1352P7

Hi Ryan and YiKai,

CC1352p7 was used in Remote device and powered by battery. ZigBee stack (Suzi in the future) will be used. Could you please give some suggestion about low power consumption example for start with.

Best regards,

David

over 3 years ago

+1 YiKai Chen over 3 years ago

Guru 735695 points

You can use zed_switch as reference for low power applications.

+1 Ryan Brown1 over 3 years ago

TI__Guru**** 220367 points

Hi David,

Along with what YK has stated, I recommend defining CUI_DISABLE and removing BOARD_DISPLAY_USE_UART. As this will disable commissioning through user interactions, you can review the Z_POWER_TEST code to discover methods for automatic commissioning on startup. You can also refer to the Power Configurations section of the Z-Stack User's Guide. Zigbee power measurements are evaluated quarterly to ensure optimum performance.

Regards,
Ryan

0 dAVID over 3 years ago in reply to Ryan Brown1

Intellectual 790 points

Hi YiKai and Ryan,

Appreciated for all your great suggestion and time.

It would be a good start up and save my time.

Best regards,

David

Zigbee & Thread

Zigbee & Thread forum

CC1352P7: Example of battery powered remote device