zigbee with echo plus

Kamalesh c

Prodigy 115 points

Other Parts Discussed in Thread: CC2538, CC2652R, Z-STACK

How to connect the cc2538 microcontroller board with zigbee to amazon echo plus ?

Is there any possible to connect these devices ?

If yes, how to modify and what can I do ?

I don't have an idea about these matter. Please help me.

Best Regards,

Kamalesh. C

over 3 years ago

0 YiKai Chen over 3 years ago

Guru 735695 points

Try to refer to https://developer.amazon.com/en-US/alexa/devices/connected-devices/development-resources/zigbee . By the way, CC2538 is obsolete Zigbee SOC and it’s recommended to use CC2652R for new ZigBee device development.

0 Ryan Brown1 over 3 years ago

TI__Guru**** 219577 points

Hi Kamalesh,

I've connected TI SimpleLink devices to an Amazon Echo Plus before, and the CC253X Z-Stack 3.0.2 is certainly compatible with SimpleLink's Z-Stack, thus I believe that your setup should be possible. You will need to make sure that the Echo Plus is open for joining and that the primary channel mask of your CC2538 is scanning the same channel that the network is using. Having a Zigbee sniffer setup will help identify any joining or communication issues.

Regards,
Ryan

0 Kamalesh c over 3 years ago in reply to Ryan Brown1

Prodigy 115 points

Thank you ryan,

Please mention the procedure how the connection between my custom board of cc2538 and the amozon echo plus device.

Is there any app for adding these devices ?

Best Regards,

Kamalesh

0 Kamalesh c over 3 years ago in reply to Kamalesh c

Prodigy 115 points

How should I connect my cc2538 board with amzon alexa app in which name ?

Or without connection of alexa app we can use the echo plus ? Is there any possible ways ?

Best Regards,

Kamalesh. C

0 Ryan Brown1 over 3 years ago in reply to Kamalesh c

TI__Guru**** 219577 points

You can either give a verbal command to the Amazon Echo Plus to "Discover my devices" or select this option from inside the Alexa app's Devices menu. This will open the Hub's Zigbee network for joining, at which point you should attempt to commission your CC2538 device using the same channel settings. Once the CC2538 associates, joins, and shares its application information (ex. light) then the Alexa app should create a new device card whose name you can further edit.

Regards,
Ryan

Zigbee & Thread

Zigbee & Thread forum

zigbee with echo plus