Example app asking for sysconfig version 1.15.0

Vivek Bhageria

Other Parts Discussed in Thread: SYSCONFIG, CC2652R7, SIMPLELINK-CC13XX-CC26XX-SDK

I am trying to use the GPIO interrupt example from the simplelink_cc13xx_cc26xx_sdk. Shown below

The build fails sying that it requires sysconfig version 1.15.0. The latest version on the website is 1.14.0.

simplelink_cc13xx_cc26xx_sdk version 6.40.00.13 requires at least version 1.15.0 of SysConfig. gpiointerrupt_LP_CC2652R7_nortos_gcc C/C++ Problem

Is this a bug or am I doing something wrong?

over 3 years ago

+1 Ryan Brown1 over 3 years ago

TI__Guru**** 220577 points

Hello Vivek,

Are you using the Cloud version of SIMPLELINK-CC13XX-CC26XX-SDK? The Web Team is likely delayed from updating the webpage to host the newest SysConfig 1.15.0 due to the holiday seasons. Please note that you can download and install the local version of SIMPLELINK-CC13XX-CC26XX-SDK on your computer which will include the correct SysConfig version and can be built inside CCS v12.1 (also local/download version, not Cloud).

Regards,
Ryan

0 Andy Pozsgay over 3 years ago in reply to Ryan Brown1

Intellectual 260 points

I'm having the same issue. I downloaded and manually installed SIMPLELINK-CC13XX-CC26XX-SDK. This does install sysconfig_1.15.0. However I still get the error "simplelink_cc13xx_cc26xx_sdk version 6.40.00.13 requires at least version 1.15.0 of SysConfig". So, even though SysConfig 1.15.0 is now installed, CCS doesn't know about it.

0 Ryan Brown1 over 3 years ago in reply to Andy Pozsgay

TI__Guru**** 220577 points

Go to CCS's Window tab followed by Preferences -> Code Composer Studio -> Products and make sure the SysConfig version desired is discovered.

Regards,
Ryan

0 Andy Pozsgay over 3 years ago in reply to Ryan Brown1

Intellectual 260 points

I went to the screen you mentioned and did a Refresh, and now things are working.

Andy

0 Vivek Bhageria over 3 years ago in reply to Ryan Brown1

Intellectual 270 points

I downloaded the latest SDK version and it has worked. Thank you

Zigbee & Thread

Zigbee & Thread forum

Example app asking for sysconfig version 1.15.0