CC2652R7: Multi-fabric Matter Support

Sheetal Kadam

Prodigy 10 points

Part Number: CC2652R7

Request to help setup Multi-fabric example with CC2652R7, and any other fabric (eg. Silabs)?

over 2 years ago

0 YiKai Chen over 2 years ago

Guru 735695 points

Try to refer to Multi-admin scenario in developer.nordicsemi.com/.../chip_tool_guide.html

0 Sheetal Kadam over 2 years ago in reply to YiKai Chen

Prodigy 10 points

We want to try with lighting app. But TI there is no support for lighting-app and light-switch? how to test multi-admin ? any apps that you suggest?

0 YiKai Chen over 2 years ago in reply to Sheetal Kadam

Guru 735695 points

Actually, TI supports Matter lighting-app and light-switch. You should use chip-tool to test multi-admin functionality.

0 Sheetal Kadam over 2 years ago in reply to YiKai Chen

Prodigy 10 points

Oh nice to hear that. We dont see the CC13xx_CC26xx folder in lighting-app and light-switch example . how to build without this folder?

0 Ryan Brown1 over 2 years ago in reply to Sheetal Kadam

TI__Guru**** 219597 points

Hi Sheetal,

You can look into the chip-tool multi-admin scenario for information concerning joining a Matter device to several Matter fabrics. Interacting with data model clusters also covers access control and binding clusters, if you were to for example enable a light-switch device to control the lighting-app device. Currently the TI matter repo does not support lighting-app and light-switch for the CC2652R7, although developments are ongoing. It is possible to evaluate pump-app as this example does use the on-off cluster (also see pump-controller-app).

Regards,
Ryan

Zigbee & Thread

Zigbee & Thread forum

CC2652R7: Multi-fabric Matter Support