Other Parts Discussed in Thread: CC-DEBUGGER
Hi,
My Ubiqua Protocol Analyzer is not detecting the CC2531 packet sniffer. Please let me know how to fix this
Thanks,
Rajesh Krishnan
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
My Ubiqua Protocol Analyzer is not detecting the CC2531 packet sniffer. Please let me know how to fix this
Thanks,
Rajesh Krishnan
Is there a way to download and install the firmware without CC-debugger into CC2531 dongle?
Hi Rajesh,
Firmware can be located inside Texas Instruments\SmartRF Tools\Packet Sniffer\bin\general\firmware after the Packet Sniffer software is downloaded. As YK mentioned, the CC-DEBUGGER external debugger tool is required. You could also consider using a SimpleLink LaunchPad, which includes an on-board XDS110 debugger, and Packet Sniffer 2 for your needs. Please refer to this E2E page.
Regards,
Ryan