How to create a device group.

Ayman Hammou

Intellectual 330 points

Other Parts Discussed in Thread: Z-STACK

Hi,

Do devices group exist? If so how do I implement them using ZStack Monitor And Test API?

Any documentation I can look for or tip?

over 3 years ago

+1 YiKai Chen over 3 years ago

Guru 735695 points

You can refer to ZCL spec and use AF_DataRequest MT command to compose ZCL group add command.

0 Ayman Hammou over 3 years ago in reply to YiKai Chen

Intellectual 330 points

How do I add a device to a group after creating it?

0 YiKai Chen over 3 years ago in reply to Ayman Hammou

Guru 735695 points

As I had replied, you can send ZCL group add command from Host/ZNP to the device.

0 Ayman Hammou over 3 years ago in reply to YiKai Chen

Intellectual 330 points

Thanks!

0 Ryan Brown1 over 3 years ago

TI__Guru**** 222447 points

Hi Ayman,

There is a SLA guide for sending group commands within an application context. You can review how these packets are structured inside the Z-Stack cose, as YK has stated they will need to be translated into MT MT_AF_DATA_REQUEST commands.

Regards,
Ryan

Zigbee & Thread

Zigbee & Thread forum

How to create a device group.