I am facing an issue for flashing the CC2531 Dongle as ZigBee concentrator. My CC debugger is not able to detect in flash programmer.
Please help me on this part.
Also provide the steps for making the CC 2531 Dongle as a ZigBee Concentrator.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
I am facing an issue for flashing the CC2531 Dongle as ZigBee concentrator. My CC debugger is not able to detect in flash programmer.
Please help me on this part.
Also provide the steps for making the CC 2531 Dongle as a ZigBee Concentrator.
Try to refer to https://www.ti.com/lit/ug/swru221a/swru221a.pdf and make sure you connect debug pins and VCC/GND all properly.
Hi Jiju,
Is the LED on the CC-DEBUGGER lit green? Make sure both the CC2531EMK and CC-DEBUGGER are connected/powered before pushing the reset button on the CC-DEBUGGER. Consider following this zigbee2MQTT guide.
Regards,
Ryan