• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 56 subscribers
  • Views 435 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

how to write HOME AUTOMATION project using sample project

ag india
Prodigy 165 points

Other Parts Discussed in Thread: Z-STACK

can any 1 guide me how to modify the home automation project in z-stack sample app for own project.........

I am confuse where to writet code for light,buzzer,etc in both switch as well as light profile............

  • 0
    TI__Mastermind 19350 points

    Just start reviewing the existing documentation:

    C:\Texas Instruments\ZStack-CC2530-2.5.0\Documents

    I think that a lot of effort has been put into the collateral for Smart Energy, so those would be useful. Although it is not exactly Home Automation, it is based on the ZCL, ZigBee Cluster Libraries, so you will get a good feel about how to interact with it:

    Smart Energy Sample Application User's Guide.pdf

    Z-Stack Smart Energy Developer's Guide.pdf

     

  • 0 in reply to Dirty Harry
    Prodigy 165 points

    hello sir.......

    thanks for reply......

    i have read all this documents.... I know how to build own network but not getting how to transmit messages or task to specific end device (where to set dest. ID ?).....

    and also how to make own application profile?

    please reply...........

    Thank you.......