CC2652R: Zigbee driver and BLE question

Hi Riley,

Riley Huang said:

1. If you want to change to Zigbee driver, can you just burn it through UART? Or do you need to pre-burn it first?

To update any firmware on the device, you can use the ROM serial bootloader (which can use UART).

You can reference the Bootloader section in the TRM: https://www.ti.com/lit/pdf/swcu185

Riley Huang said:

2. Can CC2652R use BLE and Zigbee at the same time?

Yes, this is supported through DMM (Dynamic Multi-protocol Manager) example, such as https://dev.ti.com/tirex/explore/node?node=A__AGwk-MuT6ixDUTnI68uHVA__com.ti.SIMPLELINK_CC13XX_CC26XX_SDK_DMM_MODULE__BSEc4rl__LATEST

Thanks,
Toby