IAR environment

qiang qian NUAA

Other Parts Discussed in Thread: Z-STACK

HI！

Thanks for your seeing. Yesterday when I make the project in the z-stack on the IAR environment . This problem occured at the beginning.

so I would like to find the key to this question.

/********************************************The problem begin********************************************************/

       Building configuration: SimpleApp - SimpleCollectorEB-Coordinator
      Updating build tree...
       Build error: Multiple tools write to the same file.
       File: C:\Users\Administrator.PC-20110915NLHU\Desktop\ZStack-CC2530-2.4.0-1.4.0\Projects\zstack\Samples\SimpleApp\CC2530DB\
SimpleCollectorEB-Coordinator\Obj\hal_adc.r51
     Tool 1: C/C++ Compiler, when processing C:\Users\Administrator.PC-20110915NLHU\Desktop\ZStack-CC2530-2.4.0-1.4.0\Components\hal\
common\hal_assert.c
      Tool 2: C/C++ Compiler, when processing C:\Users\Administrator.PC-20110915NLHU\Desktop\ZStack-CC2530-2.4.0-1.4.0\Components\hal\
target\CC2530EB\hal_adc.c

Build aborted.

/********************************************** The problem ends*****************************************************/

So I can not go on with my work . And I am looking forward to your answer.

qiang qian NUAA

Sincerely

over 14 years ago

0 Igor Sherer over 14 years ago

Guru 31280 points

Hi,

Did you use an out-of-the-box project, or you changed something and now the compilation

process is failing?

Have you tried to do a "rebuild all" to the project?

0 qiang qian NUAA over 14 years ago in reply to Igor Sherer

Intellectual 315 points

HI,

Igor.

I just used the stack which was supported by the products' . I didn't change anything.

Then I just rebuilded the project to delete the pentagram behind every document .

And the errors above happens.

Best Regards.

Qian

0 Igor Sherer over 14 years ago in reply to qiang qian NUAA

Guru 31280 points

What is the IAR version your are using?

0 qiang qian NUAA over 14 years ago in reply to Igor Sherer

Intellectual 315 points

Igor,

Thanks for your answer. The version is 7.51 .

Br,

Qian

0 Igor Sherer over 14 years ago in reply to qiang qian NUAA

Guru 31280 points

If I'm not mistaken, Z-Stack v2.4.0 compiled and tested for IAR v7.6.

It won't work with previous versions of IAR EW.

If this is the case, consider updating IAR to latest and most up to date

version.

0 qiang qian NUAA over 14 years ago in reply to Igor Sherer

Intellectual 315 points

Igor:

Thanks .

You are right .

And I wil try to check whether it is this problem.

Best Regards.

Qian

0 Morten Braathen over 14 years ago in reply to qiang qian NUAA

TI__Mastermind 19575 points

Yes, Z-Stack 2.4.0 is compiled with EW8051 7.60.5. It includes a few patches in addition to the inital 7.60.1 release.

Normally if you open a older version the IAR workspace file of a Z-Stack sample app with a newer EW8051 Workbench release a backup file for the old version is created in the same folder.

LPRF Rocks the World

0 qiang qian NUAA over 14 years ago in reply to Morten Braathen

Intellectual 315 points

HI.

I restall the IAR compliment after the discusion, But the error still happens. And I ask the products' supporter to help me. He still can not give me the critical

help. I feel a little frustrated . May be the SampleApp project is broken.

If there is any progress. I will renew this post here .

Thanks all the same!

Best Regards

Qian

0 qiang qian NUAA over 14 years ago in reply to Morten Braathen

Intellectual 315 points

HI.

I am doubt that whether is the preprocessor's problem .

Br,

Qian

0 Igor Sherer over 14 years ago in reply to qiang qian NUAA

Guru 31280 points

Hi,

Can you do a clean install of Z-Stack?

It is actually odd that an out-of -the-box solution isn't works

0 Morten Braathen over 14 years ago in reply to Igor Sherer

TI__Mastermind 19575 points

I looked at your error again. It seems that you have multiple files in the project trying to be build into the same file.
Do you know how to use the exclude option in IAR?

LPRF Rocks the World

0 qiang qian NUAA over 14 years ago in reply to Igor Sherer

Intellectual 315 points

HI，

This Z-stack is not an out-of-the-box solution. And I use another z-stack to substitute this one . And now everything is going on well.

Thanks for your answer all the way. Best wishes for you !

Best regards.

Qian

0 qiang qian NUAA over 14 years ago in reply to Morten Braathen

Intellectual 315 points

I j ust know where to change the compile options. Options-> Compiler-> Preprocessor

But I really do not understand these options' significance . And how to use it . I will try to search some articles to help me.

Thanks for your sincerely help. Best wishes to you !

B,r,

Qian

Zigbee & Thread

Zigbee & Thread forum

IAR environment