LAUNCHXL-CC1352P: .

Marieta Yordanova

Part Number: LAUNCHXL-CC1352P
Other Parts Discussed in Thread: PACKET-SNIFFER, CC2531EMK

Tool/software:

Hello! Can the CC1352P1-4 be a coordinator in a ZigBee network and if trace its traffic with a PACKET-SNIFFER with a CC2531EMK. Please help how can I run the network with these 2 boards.

3 months ago

0 Ryan Brown1 3 months ago

TI__Guru**** 211907 points

Hi Marieta,

Here are links for LAUNCHXL-CC1352P-4 ZC firmware (choose the correct desired end application, including an optional ZNP) and Z-Stack packet sniffer solutions. Even with the CC2531EMK sniffer firmware, it is unlikely that PACKET-SNIFFER 1 software will be able to decrypt the Zigbee 3.0 security. Therefore you should consider upgrading to PACKET-SNIFFER-2 and a SimpleLink LP sniffer, or using Ubiqua.

Regards,
Ryan

0 Marieta Yordanova 3 months ago in reply to Ryan Brown1

Prodigy 10 points

Thanks! I'm a beginner and now I just want to launch a ZigBee network with 1 coordinator to act as a Trust Center.

0 YiKai Chen 2 months ago in reply to Marieta Yordanova

Guru 735625 points

As Ryan had replied you, you can run zc_light of LAUNCHXL-CC1352P-4 ZC firmware to act as Zigbee coordinator(trust center) on one of your Launchpad and zed_sw on another launchpad as Zigbee end device to join coordinator.

0 Marieta Yordanova 2 months ago in reply to YiKai Chen

Prodigy 10 points

Thank you for your reply!

Zigbee & Thread

Zigbee & Thread forum

LAUNCHXL-CC1352P: .