How to use Z-tool ?

NID

Hi there, I've been searching on document on how to use Z-tool. Every time i tried to run Ztool i got this error ( The application failed to initialize properly (0xc0000135)).Can anyone please link me to the Z-tool info or just gave a few tips or example how to use it, I would really appreciate it. Thanks for reading this post.

-NID

over 14 years ago

0 Igor Sherer over 14 years ago

Guru 31280 points

Hi NID,

Once you in Z-Tool folder, open the "Z-ToolHelp.chm" file.

0 Dirty Harry over 14 years ago

TI__Mastermind 19350 points

Sounds like your trying to run Z-Tool on Window 7 / Vista (it only runs on Windows XP/2000)

0 NID over 14 years ago in reply to Igor Sherer

Intellectual 330 points

Hi Igor,

Thanks for the info, really appreciated your patient with my stupid question :) thanks again.Have a nice day

-NID

0 NID over 14 years ago in reply to Dirty Harry

Intellectual 330 points

Hi Dirty Harry,

Thank for the answer. You might be right, I'm using Window Xp mode in windows 7. This might be the problem. In any case i will do some updating in my window Xp mode 1st and see how it goes.Thanks again :)

-NID

0 NID over 14 years ago in reply to Dirty Harry

Intellectual 330 points

Hi Dirty Harry,

Yahooo, it works now. I did the update for the Microsoft .net 2.0 and everything works well now.Thanks again

-NID

0 Eduardo Saenz over 12 years ago in reply to NID

Prodigy 170 points

Hi, in my case z-tool works well but when I try to execute SAMPLE jscript shows several errors

Error: Declaration expected.
File: C:\Texas Instruments\ZStack-1.4.3-1.2.0\Tools\Z-Tool\Sample.js
Line: 1
Source: import System;

Error: Declaration expected.
File: C:\Texas Instruments\ZStack-1.4.3-1.2.0\Tools\Z-Tool\Sample.js
Line: 1
Source: import TI.ZPI1;

*** COMPILE TIME ERROR **

SOMEONE know the origin of these ERRORS?

Zigbee & Thread

Zigbee & Thread forum

How to use Z-tool ?