CC2652P: Which file can change TX_POWER, Bootloader Backdoor DIO, and LF Clock Source

Kimi Hu

Part Number: CC2652P
Other Parts Discussed in Thread: SYSCONFIG

Hi,

I downloaded OpenThread from your GitHub repository (https://github.com/TexasInstruments/ot-ti). I need to change some parameters. Could you please tell me which files I should modify?

TX_POWER
Bootloader Backdoor DIO & Trigger Level of Bootloader Backdoor
LF Clock Source

5 months ago

+1 Ryan Brown1 5 months ago

TI__Guru**** 223757 points

Hi Kimi,

These are achieved through modification of the openthread.syscfg file, preferably by using the standalone SysConfig tool.

Custom -> IEEE -> TX power
Device Configuration -> Enable Bootloader / Backdoor
Device Configuration -> LF Clock Source

Regards,
Ryan

0 Kimi Hu 5 months ago in reply to Ryan Brown1

Mastermind 6175 points

Hi Ryan,

I download and use the sysconfig(linux version) tool. But I cannot open the sysconfig file. Pleas tell me how to fix it, thank you.

I try to open it by terminal but I get another error

0 Ryan Brown1 5 months ago in reply to Kimi Hu

TI__Guru**** 223757 points

Did you add the CLI arguments as instructed in the GitHub document I linked? This would explain the board and device missing arguments.

// @cliArgs --product <path to SDK>/.metadata/product.json --board /ti/boards/CC1352P_2_LAUNCHXL --rtos freertos

Your SDK path could look like "/home/kimi/ot-ti/third_party/ti_simplelink_sdk/repo_cc13xx_cc26xx/.metadata/product.json"

Regards,
Ryan

0 Kimi Hu 5 months ago in reply to Ryan Brown1

Mastermind 6175 points

Hi Ryan,

Thank you. It works

Zigbee & Thread

Zigbee & Thread forum

CC2652P: Which file can change TX_POWER, Bootloader Backdoor DIO, and LF Clock Source