CC2480 using with an unknown Zigbee device

KRIP

If CC2480 use as Coordinator Zigbee network, then how to communicate with an unknown Zigbee End-device (end-device detect, binding, supported commands etc.)?

over 17 years ago

"Double 0" over 17 years ago

TI__Expert 4155 points

See the sample app that comes with the ZASA installer. There's an example of service discovery using match descriptor request. You can also use the ZDO command IDs to perform more discovery functions.

Zigbee & Thread

Zigbee & Thread forum

CC2480 using with an unknown Zigbee device