Serial App

shivraj dagadi

Other Parts Discussed in Thread: Z-STACK, CC2520

Hi! all

We are working on Serial App( Z-Stack). As it is designed for full duplex purpose but we are getting only one directional communication. And its not showing any data on UART. We checked OTA data with sniffer tool. So whats the problem with SerialApp. Is there any other application which can fulfill the bi-directional communication with UART.

Thanking you.

Shivraj

over 13 years ago

0 Igor Sherer over 13 years ago

Guru 31280 points

Have you downloaded a out-of-the-box project on both sides?

What are the type of devices we are talking about here?

May it be possible that the other side (UART) do not reply,

hence the absence of data on one of the ways?

0 shivraj dagadi over 13 years ago in reply to Igor Sherer

Intellectual 350 points

yes we downloaded the code z-stack 2.5 ( SerialAPP) in both devices. An we are talking about the evaluation board MSP430+cc2520. Data is only going OTA from one side i.e. from router/end device to coordinator but its not going to UART on another side.

Shivraj

Zigbee & Thread

Zigbee & Thread forum

Serial App