CC2530- End Device cannot response the broadcast message (Match Descriptor Request) from Coordinator

Edwin Chan

Other Parts Discussed in Thread: CC2530

Hi,

I have a problem about the CC2530 End Device software.

I try all the sample program. I found that End Device cannot response the broadcast message (Match Descriptor Request) from Coordinator.

If I set the device to Router, it can response the broadcast message.

How to solve this problem?

Thanks.

0 neha wanjari over 13 years ago

Even I have the same problem.Did you get the problem solved?

0 YiKai Chen over 13 years ago

Guru 735695 points

Hi,

You can set ZED to RX_ALWAYS_ON when your Zed want to receive broadcast data.

0 neha wanjari over 13 years ago in reply to YiKai Chen

Hello,

From where i can set RX_ALWAYS_ON of ZED?

Thank you.

0 YiKai Chen over 13 years ago in reply to neha wanjari

Guru 735695 points

You can add "RFD_RCVC_ALWAYS_ON=TRUE" in the "Preprocessor" tab of "C/C ++ compiler" in project options.

0 neha wanjari over 13 years ago in reply to YiKai Chen

Hi Yikai Chen,

Thank you for your help.

Regards,

Neha

Zigbee & Thread forum