Hi,
For customer strict request due to their other automation machines, our zigbee must only operates at the last channel (2480MHz).
The environment is 9 end device reporting back to coordinator every 1 min.
When I scan through different channel using packet sniffer, I found there will be some packets at 2420MHz (one or two packets every few minutes).
It seems like those packets at 2420MHz are from one of my end device because when I unplug my coordinator, I was able to pick up some orphan message.
Normally those packets found at 2420MHz have either totally random IEEE address or PAN ID. At first I thought it wasn't mine but my Zigbee is the only device in the area.
Anyone encounter any packet leaking to other channel issues before? Thanks!
Regards,
Ted
