Master Key, Link Key, Network Key, Application Key

You can just set -DSECURE=1 in f8wConfig.cfg and define TC_LINKKEY_JOIN in your prject to enable Zigbee HA profile security.

Hello Mr Yikai Chen.,

                I feel difficulty in understanding differences of the following link keys..

TC_LINK_KEY

SAS_PRECFG_LINK_KEY

APSME_LINK_KEY

APS_LINK_KEY

Your support is needed. Thank You

Explaining those keys are not easy. I would suggest you to read ZIgbee Spec and find some related document on google to help yourself understand it. By the way, I don't see SAS_PRECFG_LINK_KEY and APSME_LINK_KEY in ZStack. Where you do find them?

The following are the actual Mr Yikai Chen.

MT_UTIL_APSME_LINK_KEY_DATA_GET

MT_ZDO_SET_LINK_KEY

DEFAULT_TC_LINK_KEY

ZCD_NV_APS_LINK_KEY_TABLE

ZCD_NV_SAS_CURR_PRECFG_LINK_KEY

If any useful web links to understand the above, Please share here Mr Yikai Chen. I will go through the ZigBee Spec now.

Thank You.

Hi Everybody and Mr Yikai Chen,

I understood the following on these keys, Let me correct if any mistakes, Share your views.

MT_UTIL_APSME_LINK_KEY_DATA_GET   -> Retrieve Key from NV, Means It stored already

MT_ZDO_SET_LINK_KEY -> 0x0023, Already Defined. Possible to change..?

DEFAULT_TC_LINK_KEY -> Already defined as 16 Bytes of hex value, 

ZCD_NV_APS_LINK_KEY_TABLE -> 0x004C, Already Defined. Possible to change..? To Read or Write from NV

ZCD_NV_SAS_CURR_PRECFG_LINK_KEY -> 0x00D3, Not used anywhere in the code and only defined as macro

Thanks and Regards,

Anybody help me out in the above please.

Thanks in advance.

Hi Friends,

Any info on the above, please help me out.

Thanks in advance.