Error in Hex file Verification

Bagiradan Sharma

Other Parts Discussed in Thread: CC2530, CC-DEBUGGER

I am using Customized board for flashing using CC debugger, till yesterday it is flashing fine. But now it is giving CC2530-ID0000:Error in HEX file Verification, It is problem with CC debugger?

over 12 years ago

0 YiKai Chen over 12 years ago

Guru 735695 points

Is the same hex file that you flash without problem before but get verification error now? or it is different hex file?

0 Bagiradan Sharma over 12 years ago in reply to YiKai Chen

Intellectual 820 points

Same hex file, which i flashed earlier

0 YiKai Chen over 12 years ago in reply to Bagiradan Sharma

Guru 735695 points

Is the LED green or red on your CC debugger when you connect to your customized board? Another suggestion is to flash another cc2530. If it is no problem to download FW, the problem is your customized board.

0 Marius Boarta1 over 11 years ago in reply to YiKai Chen

Prodigy 10 points

Hello,

I have the same problem using some boards from ebay. I can connect with CC-Debugger, in SmartRF Studio I can view RF packages transferred by other modules but I cannot flash my SW.

What could be the cause?

Zigbee & Thread

Zigbee & Thread forum

Error in Hex file Verification