• State
  • Locked Locked
  • Replies 3 replies
  • Subscribers 55 subscribers
  • Views 1331 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Fatal Error[e72]: Segment ZIGNV_ADDRESS_SPACE must be defined in a segment definition option (-Z, -b or -P)

siva girish
Expert 1090 points
Other Parts Discussed in Thread: CC2530

hi everybody,

i am trying to workout with a sample program of CC2530 EB, and i ended up getting the following error message in IAR. May i know what does it really means and how to clear it.

Fatal Error[e72]: Segment ZIGNV_ADDRESS_SPACE must be defined in a segment definition option (-Z, -b or -P)

Thanks and Regards,

Siva V Girish

  • 0
    Intellectual 820 points

    Which sample program you are using? In your project settings, under Linker and Linker Configuration File, check whether it is Override default is enabled or not? If it is enabled, check the correct path for file f8w2530.xcl in your project.

  • 0 in reply to Bagiradan Sharma
    Expert 1090 points

    hi sharma,

    thank you for your reply.. i used the sensor demo sample program, and even tried with f8w2530.xcl

  • 0 in reply to siva girish
    Expert 1090 points

    Hi,

       At last i got the error off from the window, but still i am not able to read the sensor data in serial, instead some special characters been displayed..  I getting a warning as shown below, Warning[Pe069]: integer conversion resulted in truncation D:\Texas Instruments\ZStack-CC2530-2.3.0-1.4.0\Components\hal\target\CC2530EB\hal_dma.c 103

    could that be the reason for the problem????

     

     

    somebody please reply.

    Siva V Girish