USB on CC2531

Rajendra Shenoy

Intellectual 480 points

Other Parts Discussed in Thread: CC2531, Z-STACK

Hi,

I am using CC2531 in my application and using the Serialapp from ZStack-CC2530-2.5.1a.

instead of UART I want to use USB serial. Can anyone suggest how this can be done in stack.

Thanks and regards,

Rajendra.

over 12 years ago

0 YiKai Chen over 12 years ago

Guru 735695 points

ZStack-CC2530-2.5.1a is obsolete. I suggest you to use Z-Stack home 1.2. There is ZNP examples that should serve your purpose.

0 TheDarkSide over 12 years ago in reply to YiKai Chen

TI__Genius 16570 points

Hi,

as Yikai suggested, you can pull the ZNP eww workspace examples in C:\Texas Instruments\Z-Stack Home 1.2.0\Projects\zstack\ZNP\CC253x folder.

It contains a 2531 configuration where the ZNP link is configured as serial over USB. The workspace includes in fact USB driver as well as USB stack with CDC class.

Thanks,

TheDarkSide

Zigbee & Thread

Zigbee & Thread forum

USB on CC2531