connect cc2530 using zstack in star topology without affect other network

saravanan gurunathan

Other Parts Discussed in Thread: Z-STACK, CC2530

we need one or more enddevice but one coordinator. all device is connected in star network. same way three device in connected with star network. These two network is not communicate. How to write a program for coordinator and end device . Please send any suggestion and sample program for that

over 12 years ago

0 YiKai Chen over 12 years ago

Guru 735695 points

Every example in Z-Stack can serve your purpose. If you don't join a router into coordinator, the network topology is star network.

0 saravanan gurunathan over 12 years ago in reply to YiKai Chen

Prodigy 80 points

how to write my own app using zstack. which file is used.

0 Zakir Hussain over 12 years ago in reply to saravanan gurunathan

Intellectual 750 points

Before Writing your Own App, try the Example in the Zstack and Understand how it Work's. If you have any Query after that. Then you can post. Experts here will respond you. If you are new to Zigbee, then I would suggest you go through Zigbee Spec. Then try the Example given in the Zstack. Then you can come back.

0 YiKai Chen over 12 years ago in reply to saravanan gurunathan

Guru 735695 points

Hi saracanan

please refer to the application note about how to create application for SmartRF05 + CC2530 at http://webstaff.itn.liu.se/~jinzh/TNE090/LAB/LAB1/Create%20New%20Application%20For%20CC2530DB.pdf

Zigbee & Thread

Zigbee & Thread forum

connect cc2530 using zstack in star topology without affect other network