• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 56 subscribers
  • Views 471 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Reg: Mesh network formation of cc25000

Sivasubramanian Shanmugavel
Prodigy 230 points
Other Parts Discussed in Thread: CC2500, CC2520, CC2538, CC2530, Z-STACK

Hello ,


       Kindly give a solution for configuring cc2500 chip as coordinator, end device and router. I need the following:

1. Steps to follow for configuring.

2. Software used for compiling.

3. Any other additional inputs.

Please acknowledge with a solution.

Regards,

Siva.S

inGlo - innovation Globally

  • 0
    Guru 735695 points

    CC2500 is not a transceiver for Zigbee. If you want to use Zigbee, you should use cc2520.

  • 0
    TI__Genius 16570 points

    Hi,

    CC2500 is not a ZigBee device.

    CC2530/CC2538 are ZigBee devices

    The SW for these devices can be found in ti/com/tool/z-stack. Please download Z-Stack Home 1.2.0.

    In Documents folder, you can find Z-Stack Developer's guide and Z-Stack Home Sample application user's guide that can guide you through the various applications and answer your questions about compilation, configuration and other specifics.

    Thanks,

    TheDarkSIde