IMPLEMENTATION OF WIRELESS SENSOR NETWORK IN CC2530DK

sir,

i have downloaded Zstack but when i am trying to open any of the eww file in IAR it is not opening.

Which IAR version do you use? To compil Z-Stack Home 1.2.1, you have to use IAR workbench for 8051 8.30 version. You can download it from http://www.iar.com/Products/Wireless-solutions/Tools-for-TI-wireless/

Sir,

Now i am able to run a file , i have installed 8.30.3 . now i am getting an error as 

[Og007]: Assembler list file generation not allowed in this version of the compiler
Error while running C/C++ Compiler
zmac_cb.c

for all files.

How to rectify this sir.

No idea why you have this problem. Please attach screen shot of your IAR. 

I suggest you remove your current IAR. Download IAR 8.30 from http://www.iar.com/Products/Wireless-solutions/Tools-for-TI-wireless/. Install it and compile again.

while uninstalling IAR use cccleaner software and delete all registry files and install new one

Thanks for the prompt reply,

While downloading & Installing , I have these 2 options 

You have two evaluation options:

My questions is , 

shall I choose the size-limited licence 

I'm just starting to use the CC2530 Kit , for developing small applications,

will this licence affect for these kinda usage. ( this 4K limit ) .

Thanks

You have to use 30-day time-limited but fully functional evaluation license.

ya 30 days full package is better if you ask me mam !!! i am using it 1ly 

dileep ,

after installation  i have built Sample Light Application from Zstack1.2.1 , then how to proceed with CC2530DK kit

Dear Yikai,

after installation  i have built Sample Light Application from Zstack1.2.1 , then how to proceed with CC2530DK kit. Let me know 

Sample light i used to work on is not from stack1.2.1 .... so i guess u can follow the user manual Z-Stack Home Sample Application User's Guide.pdf for reference mam ... 

Hi AMUDHA,

You have to follow steps in Chapter 3 of Z-Stack Home Sample Application User's Guide.pdf. If you still have any problem running example, please describe it more specific. 

tell me how to proceed to work with CC2530. i have downloaded and debuged the sample temperature sensor application it is showing a menu where i can inc or dec the temperature. but  how to sense what is the current temperature

sir,

please guide me how to get the node's address and guide me where to use these functions

Important Device Addresses
An application may want to know the address of its device and that of its parent. Use the following functions to get this device’s address, defined in Z-Stack API [2] document:
 NLME_GetShortAddr() – returns this device’s 16 bit network address.
 NLME_GetExtAddr() – returns this device’s 64 bit extended address.
 Use the following functions to get this device’s parent’s addresses, defined in Z-Stack API [2] document. Note that the term “Coord” in these functions does not refer to the ZigBee Coordinator, but instead to the device’s parent (MAC Coordinator):
 NLME_GetCoordShortAddr() – returns this device’s parent’s 16 bit short address.
 NLME_GetCoordExtAddr() – returns this device’s parent’s 64 bit extended addr