I have a suite of cc2530 dk, It work OK. Now, I want to download cc2530 zdk sample source code. shall I where to download?
another problem, The SmartRF05BB(the battery boards) of CC2530 ZDK could purchase independently?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
I cann't download this file swrc126.zip (22MB) - contains ZStack-CC2530-2.5.1-a.exe
I want to depende CC2530ZDK Quick Start Guide to operate the ZSensorMonitor demo. But origin firmware of my SmartRF05EB had been modified. So I don't know which is the origin source code.
ps. I had downloaded the ZStack sample code.
I download swrc147c.zip and unzip it. But show error message when rebuild all
The error message say not find f8wcoord.cfg and f8wconfig.cfg..., I copy these files from another project then rebuild again. But error message display again.
It say Components\...... a lots file don't find.
I feel the sample package seem not complete.
This sensor demo example need to be based on Z-Stack 2.5.0. You should put it under installation\ZStack-CC2530-2.5.0\Projects\zstack\Samples
about above error messaage that I had understood from CC2530ZDK Sensor Demo User’s Guide. because has no Zstack install or ZStack version problem.
So I copy this sample folder to C:\Texas Instruments\Z-Stack Home 1.2.1\Projects\zstack\Samples then rebulid it. but still display error message as below
Error[e46]: Undefined external "ZDiagsUpdateStats::?relay" referred in APS ( C:\Texas Instruments\Z-Stack Home 1.2.1\Projects\zstack\Libraries\TI2530DB\bin\Router-Pro.lib )
Error while running Linker
Z-Stack 2.5.0 is obsolete and can be downloaded from TI website. I would suggest you contact TI local representative for it.