using cc2538 without smartRF06EB

kosanam gauthami

Other Parts Discussed in Thread: CC2538

can we use zigbee cc2538 without smartRF06EB individually by using USB or some other input source....if we can then how??

0 YiKai Chen over 10 years ago

Guru 735685 points

1.SmartRF06EB has XDS100 on it for programming CC2538.

2. SmartRF06EB is for you to wire external IO easily.

If you have done programming cc2538 and don't use external IO on SmartRF06EB, you don't have to use it.

0 kosanam gauthami over 10 years ago in reply to YiKai Chen

Thanks for the reply....

how can we give power to cc2538....?

0 TIABO over 10 years ago in reply to kosanam gauthami

Hi,

You should be able to power the CC2538EM via the USB connector. Make sure the P5 jumper is between pins 3 and 4.

Br,
TIABO

Zigbee & Thread forum