CC2538 mesh network

Mohammad Harraz

Other Parts Discussed in Thread: CC2538, Z-STACK

Dear all,

I just have a small question:

Does CC2538 support a Zigbee mesh network on hardware or in software? In other words, when I use CC2538 as a wireless network, shall I use a Zstack to have a mesh network facilities, or it is by default a mesh network in the hardware?

Thanks in advance.

Best regards,

Mohammad Salah

over 11 years ago

0 YiKai Chen over 11 years ago

Guru 735695 points

Mesh network is done by SW so you have to use Z-ZStack mesh network.

0 Mohammad Harraz over 11 years ago in reply to YiKai Chen

Prodigy 160 points

Thanks YiKai Chen for your reply.

Could you please allow me to ask you another question?

Is there any way to use Z-Stack other thanusing IAR Workbench?

Thanks in advance.

Best regards,

Mohammad Harraz

0 YiKai Chen over 11 years ago in reply to Mohammad Harraz

Guru 735695 points

No, there is no other compiler for Z-Stack. You can use IAR ONLY.

0 Mohammad Harraz over 11 years ago in reply to YiKai Chen

Prodigy 160 points

Dear YiKai Chen

Although it was not the answer I want to hear :D, I really appreciate your efforts.

Thank you

0 Mohammad Harraz over 11 years ago in reply to YiKai Chen

Prodigy 160 points

Dear YiKai Chen,

sorry for bothering you, I just have one more question.

Is there any way to an evaluation license for about 2 or three months with full features, i.e. something like educational evaluation?

Thanks in advance.

Best regards,

Mohammad Harraz

0 YiKai Chen over 11 years ago in reply to Mohammad Harraz

Guru 735695 points

You can try to contact IAR for that.

0 Mohammad Harraz over 11 years ago in reply to YiKai Chen

Prodigy 160 points

Thanks

Zigbee & Thread

Zigbee & Thread forum

CC2538 mesh network