OTA server on Zigbee gateway

tisa xavier

Prodigy 110 points

Other Parts Discussed in Thread: CC2538, Z-STACK, CC2530

Hi,

I am planning to do OTA firmware upgradation from IOT zigbee gateway via CC2538 module,its acting as a cocordinator.

My IOT device is based on IMX6 processor.What all things i need to do to implement a OTA server.

Thanks in advance,

tisa

over 11 years ago

0 OD over 11 years ago

TI__Expert 3050 points

Hi Tisa,

Have you evaluated TI's Z-Stack Linux Home Automation Gateway reference design (http://www.ti.com/tool/cc2531em-iot-home-gateway-rd)? It is based on CC2530/1, but provide full Linux support that includes an easy to use OTA server. Depending on your experience, you may be able to port the firmware to run on CC2538.

Best regards,

0 tisa xavier over 11 years ago in reply to OD

Prodigy 110 points

hi,

Thanks for the reply...

I have read the reference design,it is telling about a particular board and using CC2530. I want to know whether CC2538 can act as OTA server and how can i develop an application for firmware upgradation of CC2538 and other zigbee nodes.

Thankfully,

tisa

0 YiKai Chen over 11 years ago in reply to tisa xavier

Guru 735695 points

Hi Tisa,

Z-Stack OTA Upgrade User's Guide.pdf (SWRA353 Version 1.5) covers CC2538.

Zigbee & Thread

Zigbee & Thread forum

OTA server on Zigbee gateway