OTA firmware upgrade in zigbee nodes

tisa xavier

Other Parts Discussed in Thread: CC2538, Z-STACK

Hi,

Now i am dealing with a project in which IMX6 processor is interfaced with CC2538 zigbee module(Co-ordinator) via UART to control other zigbee nodes(Home automation).The processor acts as a IOT gatway and i want to do firmware upgradation of zigbee nodes and CC2538 module..

I am planning to install ZNP firmware in CC2538 and Z-stack linux gateway in Gateway processor(IMX6).For OTA firmware upgradation of CC2538 and other zigbee modules from the gateway what all things i should do?

Anyone please help me to find APIs for upgradation from my gateway...and please give a brief idea to start my work...

Thanks in advance

tisa

over 10 years ago

0 YiKai Chen over 10 years ago

Guru 735685 points

Try to refer to Z-Stack OTA Upgrade User's Guide.pdf under C:\Texas Instruments\Z-Stack Home 1.2.1\Documents.

0 tisa xavier over 10 years ago in reply to YiKai Chen

Prodigy 110 points

hi,

Thanks for the reply.. i have already read the doc before..but i didn't get a clear idea. Can u give any clarification...

Thanks in advance,

tisa

0 YiKai Chen over 10 years ago in reply to tisa xavier

Guru 735685 points

I suggest you following the step in OTA user guide to test it first. After you have some experiences and know more details on it, you start to do porting to your platform.

Zigbee & Thread

Zigbee & Thread forum

OTA firmware upgrade in zigbee nodes