Zigbee cluster library

Anderson Ignacio da Silva

Other Parts Discussed in Thread: Z-STACK, CC2530

Hi,

I'm beginning to develop networks with zigbee CC2530 and would like to know how and what documents do I need to start reading the development of a network, using the native libraries cluster of z-stack. So far, all the documents that I read explained how the examples worked but not as you might expand to more devices such as the Home Automation profile. I would like to know if someone has already developed some basic application and what used to perform with the z-stack and HA.

over 11 years ago

0 YiKai Chen over 11 years ago

Guru 735695 points

Examples in Z-Stack Home 1.2.1 show you some HA applications, such as thermistat, temperature sensor, light, switch, etc.

0 Anderson Ignacio da Silva over 11 years ago in reply to YiKai Chen

Intellectual 285 points

Ok, I understood what you show me, but I want to know how to expand for more than two devices, for example to export the LIGHT/SWITCH to one thousand switches that control some lights, after I read the docs. i discovered that it wasn't explaneid how to expand the configuring descriptors. Thank's a lot for your help.

0 YiKai Chen over 11 years ago in reply to Anderson Ignacio da Silva

Guru 735695 points

You can build SampleLight/SampleSwitch to ZR/ZED as many as you want and join them to Zigbbee network.

Zigbee & Thread

Zigbee & Thread forum

Zigbee cluster library