Ubiqua Protocol analyser

i have windows 8

hi chen,

basically i am trying to do research in related to security issues in wireless sensor network . so can the work what i have done till now that is i know to configure the network , be prepared as a Paper and be published in any journal.
pls give ur guidance. i hv gone thru yr papers , but i don't know where i am related to publish a paper.
i am thinking u as my guide , pls help me chen sir.

hi chen,
when ubiqua installed and started it is showing the processing in red color and it is not fully completed,
what is the problem

Do you have a screen shot of you Ubiqua problem?

Hi,

are you using the CC2531 as dongle sniffer?

If so, please make sure the right sniffer firmware is flashed on the dongle.

When you plug the sniffer dongle, a device under Cebal controlled devices --> CC2531 USB dongle under your Windows device manager should appear.

For any other questions about Ubiqua, please contact Ubiqua support: 

http://support.ubilogix.com/home   

Thanks,

TheDarkSide

 

sir,

i have not gone through the zigbee based papers , but i just gone thru yr antenna related papers just to have an idea to write a paper.

Hi TheDarkSide,

How to use CC2531 as ZC , can u guide me.

You can use ZTool with CC2531EMK running ZNP. Try to refer to sunmaysky.blogspot.tw/.../setup-zigbee-ha-coordinator-with-ti.html

hi,

where to get  the right sniffer firmware to be flashed on the cc2530

I attach the sniffer FW for CC2530.

8244.firmware.zip

thank u, i used the firmware u upload ,but still can't start capturing and the reason is" Ubiqua was unable to start the sniffer, it might be in use by another application or it has been removed from the computer."
i'm sure nothing use the port and i restart the windows 10 and tried to disable and enable the ports but nothing change.
and i have three checkBox on the device i add is plugged, is stared, is networked. i just got is plugged
i read the user guide but nothing useful about this problem.
could u plz help with this issue?

What HW do you use as sniffer?

CC2530

Do you use CC2530DK?

no i use CC2530EM core, do i need CC2530DK?

I test with my CC2530DK and it doesn't work too. I think you will need to use CC2531 USB dongle.

ok, thank u YiKai Chen

You are welcome.