NV Read issues + CC2530

Would you show me the source code how you do NV write and read?

Below is the source code for the same

Profile_t *ProfBuff,*Prof;

//NV item
#define nv_app_profile_id 0x0403

osal_nv_item_init(nv_app_profile_id,DataLength, NULL);
status=osal_nv_write(nv_app_profile_id, 0,DataLength, Prof); //writing prof into NV
if(status == SUCCESS)
{
HalLcdWriteString("write Succeess");
}
else
{
HalLcdWriteString("write Failure");
}

if((osal_nv_read(nv_app_profile_id, 0, DataLength,ProfBuff)) == SUCCESS) //reading into profbuff from nv.
{

uint8 lt = ProfBuff->lo_temp_tr;

HalLcdWriteValue (ProfBuff->lo_temp_tr, 10, HAL_LCD_LINE_2);
}


Regards
SS

Your code for NV read/write looks fine and it should be no problem. Is it possible that your application overwrite the NV data before or right after power recycle? Where do you put these code in your application and how do you read nv_app_profile_id after power recycle?

Thanks Yikai
There was some issues related to memory in my code. I solved this issues.

Regards
SS