• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 54 subscribers
  • Views 313 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Recommended Inductor values for CC2520

Sree C
Prodigy 180 points
Other Parts Discussed in Thread: CC2520

What are the recommended Inductor values in the RF Antenna circuit for CC2520? It is not mentioned in the data sheet application circuit or i the eval board BOM.

Thanks

Srikanth

  • 0
    TI__Genius 9705 points

    Hello Srikanth, 

    On CC2520 reference design, transmission line inductors are used on the RF matching network (hence not listed in BOM). 

    Our recommendation is to copy RF section of the reference design exactly since this has been tested for performance. 

    Regards,

  • 0 in reply to SVS
    Prodigy 180 points
    We may be not be using the same stack as of the reference design hence the values might vary right! still you want us to copy the same from reference design? There are no values for TLIN inductiors mentioned in the reference design as they are created through transmission lines. Can we use inductors instead of TLIN? If so what value is suggested?