ZCL Samplelight Attribute Response

Ajit_Wadekar

Other Parts Discussed in Thread: Z-STACK

Hello Everyone,

I am using Z-Stack HA Profile in this I need to know which command is used to send response for ON/OFF Light (i.e. status of light). Which ZCL command is called for this response?

over 11 years ago

0 YiKai Chen over 11 years ago

Guru 735695 points

As I rember, I had help you in the same issue in e2e.ti.com/.../1402123. Is there anything wrong?

0 Ajit_Wadekar over 11 years ago in reply to YiKai Chen

Mastermind 7620 points

Sir for this will I need to change anything on coordinator side? Or will it directly process the command in zcl and reflect the output on the coordinator.

Sorry for the trouble having some confusion.

0 YiKai Chen over 11 years ago in reply to Ajit_Wadekar

Guru 735695 points

It is directly processed by ZCL.

Zigbee & Thread

Zigbee & Thread forum

ZCL Samplelight Attribute Response