Routing in cc2530

VENKATA SATYANARAYANA SILLA

Genius 4195 points

Other Parts Discussed in Thread: CC2530, Z-STACK

Hi Ti,

How to form the source routing in the cc2530 zigbee network?

over 11 years ago

0 YiKai Chen over 11 years ago

Guru 735695 points

You can refer to chapter 5 routing in Z-Stack Developer's Guide.pdf

0 VENKATA SATYANARAYANA SILLA over 11 years ago in reply to YiKai Chen

Genius 4195 points

Dear YiKai Chen
Which Type of routing mechanisam used in the cc2530 zigbee module?

0 YiKai Chen over 11 years ago in reply to VENKATA SATYANARAYANA SILLA

Guru 735695 points

ZigBee uses a routing protocol that is based on the AODV (Ad-hoc On-demand Distance Vector) routing protocol
for ad-hoc networks. Simplified for use in sensor networks, the ZigBee routing protocol facilitates an environment
capable of supporting mobile nodes, link failures and packet losses.

0 VENKATA SATYANARAYANA SILLA over 11 years ago in reply to VENKATA SATYANARAYANA SILLA

Genius 4195 points

is it using source routing or AODV routing?

0 VENKATA SATYANARAYANA SILLA over 11 years ago in reply to YiKai Chen

Genius 4195 points

Dear Yikai Chen
is it using source routing or AODV routing?

0 YiKai Chen over 11 years ago in reply to VENKATA SATYANARAYANA SILLA

Guru 735695 points

Source routing is part of the many-to-one routing that provides an efficient way for concentrator to send response or
acknowledgement back to the destination. Please read the document first.

0 VENKATA SATYANARAYANA SILLA over 11 years ago in reply to YiKai Chen

Genius 4195 points

Thank you sir

0 YiKai Chen over 11 years ago in reply to VENKATA SATYANARAYANA SILLA

Guru 735695 points

You are welcome!

Zigbee & Thread

Zigbee & Thread forum

Routing in cc2530