Z-Stack-Lighting-1.0.2: Porting to CC2538

Iju

Expert 1985 points

Other Parts Discussed in Thread: CC2538

Hi,

I am trying to port 'zll samplelight' to CC2538.

I would like to get any user guide or document available for driver API's for ZLL. I could not find any document specifying API's like

'halTimer1SetChannelDuty'.

I really appreciate any suggestions on the same.

Thanks & Regards,

Ijaz Fazily

over 10 years ago

0 YiKai Chen over 10 years ago

Guru 735685 points

halTimer1SetChannelDuty is used for change PWM duty cycle. If you want to implement it on CC2538, you have to refer to gptimer example in cc2538_foundation_firmware.

0 Iju over 10 years ago in reply to YiKai Chen

Expert 1985 points

Hi,

Thanks you for the update.

gptimer example in foundation_firmware ?. Did you mean ZNP firmware?. I did not mean timer set/load/match API's.

I am looking for driver API's of ZLL, like hal_timer API's.

--
Ijaz

0 YiKai Chen over 10 years ago in reply to Iju

Guru 735685 points

You can download CC2538 Foundation Firmware from www.ti.com/.../cc2538-sw

0 Iju over 10 years ago in reply to YiKai Chen

Expert 1985 points

Hi
Is there any API doc available for hal timer APIs in ZLL 1.0.2 ?.

--
Ijaz

0 YiKai Chen over 10 years ago in reply to Iju

Guru 735685 points

As I know, there is no such API document.

Zigbee & Thread

Zigbee & Thread forum

Z-Stack-Lighting-1.0.2: Porting to CC2538