Error while executing a project in IAR 9.10.3 The stack pointer for stack 'Idata Stack' (currently IData:0x07) is outside the stack range (IData:0x40 to IData:0x100)

AMUDHA GUNASEKARAN1

Other Parts Discussed in Thread: CC2530

My zstack is 1.2.1

can anyone suggest what to do?

over 11 years ago

0 Sunil Oak over 11 years ago

TI__Mastermind 49120 points

What MCU are you working with? I think this question would be better answered by the support team at IAR.

0 AMUDHA GUNASEKARAN1 over 11 years ago in reply to Sunil Oak

Genius 3220 points

sir, no one is answering. i just executed a c program in IAR 9.10. Pls guide me how to start working with the CC2530DK kit.

0 Sunil Oak over 11 years ago in reply to AMUDHA GUNASEKARAN1

TI__Mastermind 49120 points

Hi Amudha,

This is also the wrong forum for questions related to the CC2530 parts. I will forward this thread onto the correct forum.

Normally, you can get a faster resolution if you specify exactly which part you are looking for help with.

Regards, Sunil

Zigbee & Thread

Zigbee & Thread forum

Error while executing a project in IAR 9.10.3 The stack pointer for stack 'Idata Stack' (currently IData:0x07) is outside the stack range (IData:0x40 to IData:0x100)