where is the ZSTACK which support 6LoWPAN ?

BINGLING CHIANG

Prodigy 30 points

Other Parts Discussed in Thread: Z-STACK

At https://e2e.ti.com/support/wireless_connectivity/f/158/t/152477, FireFighter said the ZSTACK will support 6LoWPAN.

But at http://www.ti.com/tool/Z-Stack, I can't find the version supporting 6LoWPAN

Did TI release this version's ZSTACK or what is the latest information about the ZSTACK for 6LoWPAN?

Thank you!!

over 10 years ago

0 YiKai Chen over 10 years ago

Guru 735695 points

Z-Stack is for Zigbee. If you would run 6LoWPAN on TI wireless SOC, you have to use Contiki.

0 BINGLING CHIANG over 10 years ago in reply to YiKai Chen

Prodigy 30 points

So there is no ZSTACK for Zigbee IP(support IPv6)? Thank you!

0 YiKai Chen over 10 years ago in reply to BINGLING CHIANG

Guru 735695 points

As I know, TI implement it for Smart Energy Profile. However, it won't be public available on TI web site. I think you can try to contact TI local representative to sign SLA to get it.

0 TheDarkSide over 10 years ago in reply to YiKai Chen

TI__Genius 16570 points

Hi,
I would recommend you take a look at the 6LoWPAN Contiki stack which supports our CM3 devices

processors.wiki.ti.com/.../Contiki-6LOWPAN

The information in the post you mentioned is 4 years old and we decided to hold every ZigBee IP development because of the non-existent market traction. The ZigBee IP standard is only addressing a targeted use case and the market has moved in another direction from a technological standpoint.
Our recommendation is to use the Contiki port on our devices instead.
Thanks,
TheDarkSide

0 BINGLING CHIANG over 10 years ago in reply to TheDarkSide

Prodigy 30 points

Thank you a lot . I got it!!

Zigbee & Thread

Zigbee & Thread forum

where is the ZSTACK which support 6LoWPAN ?