cc2530 Zigbee end device rejoin

VENKATA SATYANARAYANA SILLA

Hi Ti

I put the ZCD_NV_POLL_FAILURE_RETRIES is 2.if the end device not receive any acknowledge from its parent it generate orphan notification in the network.now my doubt is

1.i turned off remaining routers and coordinator in the network then how much time it generate orphan notification in the network?

2.some of the routers are existing in the network but no one respond then how many times end device send orphan notification in the network?

over 10 years ago

0 YiKai Chen over 10 years ago

Guru 735695 points

1. This depends on polling rate of ZED.
2. When ZED becomes orphan, it only sends orphan notification one time. If there is no response, ZED starts sending beacon requests.

0 VENKATA SATYANARAYANA SILLA over 10 years ago in reply to YiKai Chen

Genius 4195 points

Dear Yk Chen

1.is ZED send the beacon requests for existing PAN's in all enable channels?

0 YiKai Chen over 10 years ago in reply to VENKATA SATYANARAYANA SILLA

Guru 735695 points

Yes, beacon request is sent by broadcast.

0 VENKATA SATYANARAYANA SILLA over 10 years ago in reply to YiKai Chen

Genius 4195 points

Dear Yk Chen

is this beacon requests are join for the new parent?

0 YiKai Chen over 10 years ago in reply to VENKATA SATYANARAYANA SILLA

Guru 735695 points

Yes.

Zigbee & Thread

Zigbee & Thread forum

cc2530 Zigbee end device rejoin