ZStack Installer Not Running

Krishnandu Sarkar

Other Parts Discussed in Thread: Z-STACK, CC2531, CC-DEBUGGER

Hi All,

I'm new to this and trying to setup ZStack on my Beaglebone Black. But unfortunately, when I run the file, it shows "Cannot execute binary file : Exec format error".

I have tried going through various posts over the forum, but it didn't helped. As peoples who were facing this problem used to have 64 Bit version while I have 32 Bit version only,

I'm uploading a screenshot below for reference.

Any help regarding the same would be really appreciated.

over 10 years ago

0 YiKai Chen over 10 years ago

Guru 735685 points

You should install Ubuntu on PC and run the script on it not on BBB.

0 mike snyder over 10 years ago in reply to YiKai Chen

Intellectual 945 points

I am going to chime in here, having just finally gotten zstack linux gateway installed.

It seems like TI chose to use this script approach, instead of a zip file, just to ensure the EULA is agreed to, before having access to the files.
I basically had to build a 32 bit Ubuntu VM, just to unarchive the files, before moving the files elsewhere.

It is not really clear from the instructions on the Z-stack home page, that this is the case.

Once you have the tools installed, you can copy the files out of the Ubuntu VM, and use the CC-debugger to flash a CC2531 dongle.
I am about to wipe the dust from the BBB to see if I can get that part working.

0 YiKai Chen over 10 years ago in reply to mike snyder

Guru 735685 points

Hi Mike,
It seems You have make it work. Do you still need any help?

0 mike snyder over 10 years ago in reply to YiKai Chen

Intellectual 945 points

At the moment, no, but thank you for asking.
I just saw other people with the same confusion I was having, so I wanted to share my experience.

Have a good weekend.

Zigbee & Thread

Zigbee & Thread forum

ZStack Installer Not Running