Device Remove with Rejoin

Ajit_Wadekar

Other Parts Discussed in Thread: Z-STACK

Hello Everyone,

I have multiple coordinator's which have different routers connected to respective coordinators and now I need to remove these devices(i.e. router) from respective coordinator so that it can join other coordinator.

So my question how can I do this?

Regards,

Ajit Wadekar

over 10 years ago

0 YiKai Chen over 10 years ago

Guru 735685 points

You can use API ZDP_MgmtLeaveReq to ask ROUTER to leave Zigbee network.

0 Ajit_Wadekar over 10 years ago in reply to YiKai Chen

Mastermind 7620 points

Sir can you please give an example for ZDP_MgmtLeaveReq().

Regards,
Ajit Wadekar

0 YiKai Chen over 10 years ago in reply to Ajit_Wadekar

Guru 735685 points

You can refer to section 3.1.6.9 ZDP_MgmtLeaveReq() in Z-Stack API.pdf.

0 Ajit_Wadekar over 10 years ago in reply to YiKai Chen

Mastermind 7620 points

Sir after using this command will the device go in rejoin mode?

Regards,
Ajit Wadekar

0 Ajit_Wadekar over 10 years ago in reply to Ajit_Wadekar

Mastermind 7620 points

Sorry Sir,

I got it, its given in command for rejoin option.

Thank you.

Sir I am using Linux Gateway from where these routers are removed, so what command should i use on gateway in order to achieve the same thing (here we are having multiple Linux gateways).

0 YiKai Chen over 10 years ago in reply to Ajit_Wadekar

Guru 735685 points

I remember there is a delete/remove option on Linux GW which uses ZDP_MgmtLeaveReq.

Zigbee & Thread

Zigbee & Thread forum

Device Remove with Rejoin