When Orphan notification will sent out?

Zhi Gang Chen

Prodigy 190 points

Other Parts Discussed in Thread: Z-STACK

I use a tool to do a communication reliability test about ED and Coordinator.

but meet a very strange situation that suddenly send out a Orphan notification.

Orphan notification abnormal.psd

over 10 years ago

0 YiKai Chen over 10 years ago

Guru 735685 points

Can you specify which Z-Stack version and example you test?

0 Zhi Gang Chen over 10 years ago in reply to YiKai Chen

Prodigy 190 points

1. Z-Stack Version: z-stack-cc2530-2.3.0-1.4.0

2. About my test as below. thx

0 Zhi Gang Chen over 10 years ago in reply to YiKai Chen

Prodigy 190 points

Chart ZIGBEE Router maybe is not correct. actually it mean Router or Coordinator.
Right now i just use coordinator not router.

0 YiKai Chen over 10 years ago in reply to Zhi Gang Chen

Guru 735685 points

Z-Stack 2.3.0 is obsolete. I suggest you to download latest Z-Stack and test again.

0 Zhi Gang Chen over 10 years ago in reply to YiKai Chen

Prodigy 190 points

update the flow chart

0 YiKai Chen over 10 years ago in reply to Zhi Gang Chen

Guru 735685 points

By the way, how far between two PC and where do put your sniffer?

0 Zhi Gang Chen over 10 years ago in reply to YiKai Chen

Prodigy 190 points

Right now just for debug, so i use the same PC but open two software for debugging. Enddevice and coordinator is very closed(about 10cm), also the sniffer plug in same PC

0 YiKai Chen over 10 years ago in reply to Zhi Gang Chen

Guru 735685 points

So, this is not a distance problem. I still suggest you to use latest Z-Stack to test this and see if you still have the same issue.

Zigbee & Thread

Zigbee & Thread forum

When Orphan notification will sent out?