((MT API)) and ((ZCL))

Farhad Kafi

Other Parts Discussed in Thread: Z-STACK

Hi,

Why Z-stack MT library dose not have any API for Zigbee Cluster Library ?

Is there any reason for this?

As an example i have a gateway in system that connect my mobile app to my zigbee led lamp. how should i send on/off cmd ?

over 10 years ago

0 YiKai Chen over 10 years ago

Guru 735695 points

Do you mean there is no MT command for ZCL? This is because you can do this by AF_DataRequest.

0 Farhad Kafi over 10 years ago in reply to YiKai Chen

Intellectual 860 points

Hi YiKai ;
yes,exactly.
Can you explain how should i implement on/off cmd with AF_DataRequest ?

0 YiKai Chen over 10 years ago in reply to Farhad Kafi

Guru 735695 points

You can read ZCL spec and trace into zclGeneral_SendOnOff_CmdToggle in SampleSwitch to know how to use AF_DataRequest to implement ON/OFF/TOGGLE commands.

0 Farhad Kafi over 10 years ago in reply to YiKai Chen

Intellectual 860 points

Depending on your answer , we should write every zigbee cluster commands again with AF_DataRequest while they are written by TI team before.right?

0 YiKai Chen over 10 years ago in reply to Farhad Kafi

Guru 735695 points

Yes, i think so. The alternative is that you can try to reuse the code in Z-Stack Linux Home Gateway reference design.

0 Farhad Kafi over 10 years ago in reply to YiKai Chen

Intellectual 860 points

what do you mean that i reuse the code in Z-Stack Linux Home Gateway reference design?
can you explain ?

0 YiKai Chen over 10 years ago in reply to Farhad Kafi

Guru 735695 points

As I know, Z-Stack Linux Home Gateway implement this part so you can look into the source code to see if you can reuse it.

Zigbee & Thread

Zigbee & Thread forum

((MT API)) and ((ZCL))